Isolation of chemical constituents from Enicosanthum cupulare (King) Airy-Shaw

Six chemical constituents were isolated from Enicosanthum cupulare (King) Airy-Shaw. The structures of the isolated compounds were determined using 1D, 2D-NMR and were found to be identical to those previously reported for these compounds. Three aporphine alkaloids, O-methylmoschatoline, liriodenine and oxostephanine were isolated from this plant for the first time. In addition, we examined the effects of these compounds on melanogenesis in murine B16 melanoma cells; O-methylmoschatoline increased melanin content in these cells.     

Equivalent contributing depth investigated by a lateral wave with axial transmission in viscoelastic cortical bone

Cortical bone is a viscoelastic heterogeneous medium which may be assessed with axial transmission. This work aims at evaluating the average depth investigated by the lateral wave for radial variations of material properties in relatively thick cortical bone. The equivalent contributing depth (ECD) is derived from the finite element simulation results for spatial variations of a viscoelastic coefficient (η(11)) and of porosity. A value of ECD equal to around 1.6 mm is obtained for a spatial variation of η(11). The method fails to predict accurate values of the ECD for a spatial variation of porosity, because all parameters vary simultaneously.     

The phase diagram for coexisting d-wave superconductivity and charge-density waves: cuprates and beyond

Phase diagrams of d-wave superconductivity characterized by an order parameter Δ coexisting with charge-density waves (CDWs) characterized by an order parameter Σ were constructed for the two-dimensional Fermi surface (FS) appropriate to, e.g., cuprates. CDWs were considered as an origin of the pseudogap appearing at antinodal FS sections of the d(x2-y2) superconductor. Two types of the Σ-reentrance were found: with the temperature, T, and with the opening of the CDW sector, 2α. The angular plots in the momentum space for the resulting gap profile over the FS ('gap roses') were obtained. The gap patterns are rather involved, giving insight into the difficulties of the interpretation of photoemission spectra. It was shown that the Σ-Δ coexistence region exists even for the complete dielectric gapping due to the distinction between the superconducting and CDW order parameter symmetries. The checkerboard and unidirectional CDW configurations were examined, and both the phase diagrams and the behavior with T and α of the order parameters were found to differ. A more general case with a non-zero mismatch angle β between the superconducting lobes and the CDW sectors was analyzed, the case β = π/4 corresponding to the d(xy) symmetry of the superconducting order parameter. The phase diagrams were found to be sensitive to β-variations, showing that internal strains and external pressure can drastically affect the behavior of Σ(T) and Δ(T).     

Simulation of container filling process with two inlets by improved smoothed particle hydrodynamics (SPH) method

In this article, an improved smoothed particle hydrodynamics (SPH) method is proposed to simulate the filling process with two inlets. Improvements are achieved by deriving a corrected kernel gradient of SPH and a density re-initialisation. In addition, a new treatment of solid wall boundaries is presented. Thus, the improved SPH method has higher accuracy and better stability, and conserves both linear and angular momentums. The validity of the new boundary treatment is shown by simulating the spin-down problem. The bench tests are also presented to demonstrate the performance of the improved SPH method. Then the filling process with a single inlet is simulated to show the ability to capture complex-free surface of the proposed method. Finally, the filling process with two inlets is numerically investigated. The numerical results show that the filling patterns are affected significantly by Reynolds number, aspect ratio of the container and the location of the inlets.     

Hydrogen bonding interactions,crystallization, and surface hydrophobicity in nanostructured epoxy/block copolymer blends

Hydrogen bonding interactions, phase behavior, crystallization, and surface hydrophobicity in nanostructured blend of bisphenol A‐type epoxy resin (ER), for example, diglycidyl ether of bisphenol A (DGEBA) and poly(ε‐caprolactone)‐block‐poly(dimethyl siloxane)‐block‐poly(ε‐caprolactone) (PCL–PDMS–PCL) triblock copolymer were investigated by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry, transmission electron microscopy, small‐angle X‐ray scattering, and contact angle measurements. The PCL–PDMS–PCL triblock copolymer consisted of two epoxy‐miscible PCL blocks and an epoxy‐immiscible PDMS block. The cured ER/PCL–PDMS–PCL blends showed composition‐dependent nanostructures from spherical and worm‐like microdomains to lamellar morphology. FTIR study revealed the existence of hydrogen bonding interactions between the PCL blocks and the cured epoxy, which was responsible for their miscibility. The overall crystallization rate of the PCL blocks in the blend decreased remarkably with increasing ER content, whereas the melting point was slightly depressed in the blends. The surface hydrophobicity of the cured ER increased upon addition of the block copolymer, whereas the surface free energy (γ_s) values decreased with increasing block copolymer concentration. The hydrophilicity of the epoxy could be reduced through blending with the PCL–PDMS–PCL block copolymer that contained a hydrophobic PDMS block. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 790–800, 2010     

Photometric, colorimetric, and acid-base characteristics of nitroso-R-salt

Optical and colorimetric characteristics of 1-nitroso-2-naphthol-3,6-disulfonic acid (nitroso-R-salt) are studied in aqueous solutions at pH 4–10. Equations of calibration plots are obtained as the colorimetric functions of the concentration, and the molar coefficients of the colorimetric functions are calculated. The dissociation constants of nitroso-R-salt are determined by colorimetry at an ionic strength of 0.1–0.5, reduced to zero ionic strength, and compared with the literature data. Advantages of colorimetry over spectrophotometry in the determination of the dissociation constants of colored reagents are demonstrated.     

Field Patterns of the TE Modes in Ridge-Trough Waveguide

A single-ridge waveguide with a symmetrical longitudinal trough, designated as a ridge-trough waveguide has been used as a transition in a V-band (50-75 GHz) wafer probe recently. In this paper, the field patterns for the dominant TE mode and the first higher TE mode in ridge-trough waveguide with different configurations are presented by finite element method. The field patterns in this paper have important values for us to understand the transmission characteristics of ridge-trough waveguide, and will be of practical significance in designing ridge-trough waveguide components in microwave and millimeter wave engineering.     

A Cartesian‐grid collocation method based on radial‐basis‐function networks for solving PDEs in irregular domains

This paper reports a new Cartesian‐grid collocation method based on radial‐basis‐function networks (RBFNs) for numerically solving elliptic partial differential equations in irregular domains. The domain of interest is embedded in a Cartesian grid, and the governing equation is discretized by using a collocation approach. The new features here are (a) one‐dimensional integrated RBFNs are employed to represent the variable along each line of the grid, resulting in a significant improvement of computational efficiency, (b) the present method does not require complicated interpolation techniques for the treatment of Dirichlet boundary conditions in order to achieve a high level of accuracy, and (c) normal derivative boundary conditions are imposed by means of integration constants. The method is verified through the solution of second‐ and fourth‐order PDEs; accurate results and fast convergence rates are obtained. © 2007 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007